RC-Monster Forums - View Single Post

Gustav · 09.08.2005, 06:13 PM

Of the four connectors, one is for charging only,2 are for the LVC,and the the other for discharge(power wires you're going to connect to the esc in series with your second pack.

For the LVC wires(small 3 pin connectors),you'll connect one to your esc from pack A,another from pack B to the reciever.Then pack A and pack B will connect together via the remaining 2 LVC wires.(you can't get it wrong because you have 1 male and 1 female LVC (small 3 pin connector) on each pack.

	(#32)
Gustav RC-Monster Aluminum Offline Posts: 916 Join Date: Jul 2005 Location: UK	09.08.2005, 06:13 PM Of the four connectors, one is for charging only,2 are for the LVC,and the the other for discharge(power wires you're going to connect to the esc in series with your second pack. For the LVC wires(small 3 pin connectors),you'll connect one to your esc from pack A,another from pack B to the reciever.Then pack A and pack B will connect together via the remaining 2 LVC wires.(you can't get it wrong because you have 1 male and 1 female LVC (small 3 pin connector) on each pack.