RC-Monster Forums - View Single Post - Jammin CRT

lincpimp · 03.29.2008, 11:33 AM

Yes the kyosho spur will fit the crt diff cup, you may need a paper gasket, as the crt might use an o-ring to seal with the current steel spur ear. Or you can use some sort of silicone or other glue to make a seal.

Just make sure that you lower the pinion tooth count to compensate for the smaller spur, but it looks like you have already figured that out!

	(#2)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	03.29.2008, 11:33 AM Yes the kyosho spur will fit the crt diff cup, you may need a paper gasket, as the crt might use an o-ring to seal with the current steel spur ear. Or you can use some sort of silicone or other glue to make a seal. Just make sure that you lower the pinion tooth count to compensate for the smaller spur, but it looks like you have already figured that out! Alot of Savage parts for sale!!!