RC-Monster Forums - View Single Post - Overall power output calculation>>>questions

BrianG · 08:44 PM

To determine your average power output:

Figure your battery capacity in Amp-minutes. Amp-minutes = Ah X 60.
Measure your runtime (in minutes).
Divide amp-minutes by runtime. This is your average current draw.
Multiply the average current draw by the nominal battery voltage (1.2v/cell for NiMH, 3.7v/cell for lipo, and 3.3v/cell for A123 cells).
Your burst power will be roughly 6x the average power.

This is your average power. However, since cars are "peaky", there will be actual spikes far greater than that and valleys smaller than that, but it at least gives you an idea.

So, let's say you have a 4s setup that gets 20 minutes of runtime on 8Ah batteries.
Amp-minutes = 8Ah X 60 = 480Am.
Average current draw is 480Am / 20min, or 24A.
Average power = 14.4v X 24A = 345.6 watts.
Burst power levels would be somewhere around 2,000w (345.6x X 6).

	(#3)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	04.02.2008, 08:42 PM To determine your average power output: Figure your battery capacity in Amp-minutes. Amp-minutes = Ah X 60. Measure your runtime (in minutes). Divide amp-minutes by runtime. This is your average current draw. Multiply the average current draw by the nominal battery voltage (1.2v/cell for NiMH, 3.7v/cell for lipo, and 3.3v/cell for A123 cells). Your burst power will be roughly 6x the average power. This is your average power. However, since cars are "peaky", there will be actual spikes far greater than that and valleys smaller than that, but it at least gives you an idea. So, let's say you have a 4s setup that gets 20 minutes of runtime on 8Ah batteries. Amp-minutes = 8Ah X 60 = 480Am. Average current draw is 480Am / 20min, or 24A. Average power = 14.4v X 24A = 345.6 watts. Burst power levels would be somewhere around 2,000w (345.6x X 6). Last edited by BrianG; 04.02.2008 at 08:44 PM.