RC-Monster Forums - View Single Post

xcntrk · 04.03.2008, 08:51 AM

^Thanks

Pics are coming. I now have a huge amount of questions to start researching. I think I’m way under-geared. I’m all the way up to 50% on the “punch-control” and it’s still pulling some hefty wheelies. I have the Revo slipper setup in-route to do that modification and have a handful of MGT spurs. I’ll probably try to step down to a 46 spur and see if that helps move the torque curve out a bit (presently running 51/20 gearing). Here’s my specs:

MM, w/2700mF Cap & Fan
Fieago 7XL w/RCM sink-clamp
CC-BEC
Receiver Cap (glitch-buster)
PolyQuest 4s 5000mah lipo

	(#3)
xcntrk RC-Monster Carbon Fiber Offline Posts: 171 Join Date: Mar 2008 Location: Virginia	04.03.2008, 08:51 AM ^Thanks Pics are coming. I now have a huge amount of questions to start researching. I think I’m way under-geared. I’m all the way up to 50% on the “punch-control” and it’s still pulling some hefty wheelies. I have the Revo slipper setup in-route to do that modification and have a handful of MGT spurs. I’ll probably try to step down to a 46 spur and see if that helps move the torque curve out a bit (presently running 51/20 gearing). Here’s my specs: MM, w/2700mF Cap & Fan Fieago 7XL w/RCM sink-clamp CC-BEC Receiver Cap (glitch-buster) PolyQuest 4s 5000mah lipo