RC-Monster Forums - View Single Post - lipo lvc for the new e-maxx esc ?

E-Revonut · 04.04.2008, 09:31 AM

I asked this question to the staff at MaxAmps. Use a 2s lvc on the side that opperates the servos as this pack will see more drain. Try the sides seperately, you won't get much but w/ one side the esc will light for a second and the servos will move a bit. I ran my new 6ah packs last night and after 12 minutes it was still pulling wheelies and the voltage was at 7.5v on each pack still. Very impressed!

	(#6)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	04.04.2008, 09:31 AM I asked this question to the staff at MaxAmps. Use a 2s lvc on the side that opperates the servos as this pack will see more drain. Try the sides seperately, you won't get much but w/ one side the esc will light for a second and the servos will move a bit. I ran my new 6ah packs last night and after 12 minutes it was still pulling wheelies and the voltage was at 7.5v on each pack still. Very impressed!