RC-Monster Forums - View Single Post - Western Robotics HBEC-HV UBEC Test

BrianG · 04.07.2008, 09:32 PM

Well, I chose this one for several reasons;

1) I already know how well DE rates from the ParkBEC test I did a while back.
2) The current is a bit higher. You're right, I won't need that much, but it means a BEC with a higher rating will do better when not pushed to the max, and I am using two servos.
3) Price is higher than the DE, but not by a whole lot for what you get.
4) I wanted to test another manufacturer that isn't as well-known. Most know DE by name, but until recently, I never heard of WR.
5) From the pics, I liked the "over-engineered" look and wanted to see if it was just fluff, or there for a reason.

	(#6)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	04.07.2008, 09:32 PM Well, I chose this one for several reasons; 1) I already know how well DE rates from the ParkBEC test I did a while back. 2) The current is a bit higher. You're right, I won't need that much, but it means a BEC with a higher rating will do better when not pushed to the max, and I am using two servos. 3) Price is higher than the DE, but not by a whole lot for what you get. 4) I wanted to test another manufacturer that isn't as well-known. Most know DE by name, but until recently, I never heard of WR. 5) From the pics, I liked the "over-engineered" look and wanted to see if it was just fluff, or there for a reason.