Quote:
Originally Posted by Arct1k
Please could you take a pic of the rx - you removed the red wire on the MM rx lead I take it - A novak HV 2700uf cap or same could help...
|
yes, i removed the esc bec wire...sorry, i forgot to mention that....also, the RX is a traxxax e-maxx 3 ch but have used a 2ch futaba too...I have the servo plugged into ch 1, the esc plugged into ch 2 and the fan and the bec plugged into ch 3 with a y harness.
here's the pic...sorry it's so hard to see...i have a poor camera.
where would i attach the capacitor?