RC-Monster Forums - View Single Post

MTBikerTim · 06:27 AM

So I made the lexan cover today. I used 3mm cause that's what the local plastic place had. It took me all day to do this and I still couldn't cut straight. Even though I got a fairly tight fit it makes the battery huge. I might have gearing issues. I did originally make it 5 sided but it wouldn't fit so I cut part of the back off as you can see bellow. It's also now too tall for the top stopper so I'm going to have to use a velcro strap but the one that came with the kit is too short.
Here are the pics:

	(#18)
MTBikerTim Yip Yip Yip... Offline Posts: 1,489 Join Date: Aug 2007 Location: Australia	04.19.2008, 06:19 AM So I made the lexan cover today. I used 3mm cause that's what the local plastic place had. It took me all day to do this and I still couldn't cut straight. Even though I got a fairly tight fit it makes the battery huge. I might have gearing issues. I did originally make it 5 sided but it wouldn't fit so I cut part of the back off as you can see bellow. It's also now too tall for the top stopper so I'm going to have to use a velcro strap but the one that came with the kit is too short. Here are the pics: Savage: FLM Conversion, 6s, MMM, CC 1520. Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S. Last edited by MTBikerTim; 04.19.2008 at 06:27 AM.