RC-Monster Forums - View Single Post

Arct1k · 10:51 AM

On a standalone setup you are missing a setup between 2 & 3 - With a standalone hyperion LBA10 - you have to press the button on the LBA 10 to say it is in charging mode and then press go on your charger...

On my 606i (build in balancer) you just setup for correct cell count etc then plug balancer in, battery in and press enter to charger.

If you plug in before setting up cell count you can get over/under voltage errors

	(#6)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	04.24.2008, 10:48 AM On a standalone setup you are missing a setup between 2 & 3 - With a standalone hyperion LBA10 - you have to press the button on the LBA 10 to say it is in charging mode and then press go on your charger... On my 606i (build in balancer) you just setup for correct cell count etc then plug balancer in, battery in and press enter to charger. If you plug in before setting up cell count you can get over/under voltage errors Last edited by Arct1k; 04.24.2008 at 10:51 AM.