RC-Monster Forums - View Single Post

MetalMan · 07:23 PM

The Feigao 380 motors currently need an adapter plate, but there might be a solution for that some time (not sure yet). BK's website carries the Lehner 400-540 mounting plate, which would work with the Feigao 380 motors.

EDIT:
Just saw your other post.

The 6s will not run well when undergeared. It won't pull enough amps to "wake up". But at the "wake up" point, it is going to pull a lot of amps, and run time will be rather short (compared to other motors, anyways). The 6s won't accelerate like the SS5800 because the SS5800 actually uses a 400 size rotor, which can get spinning to full RPM faster because of less weight in the rotor.

	(#14)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	09.15.2005, 07:19 PM The Feigao 380 motors currently need an adapter plate, but there might be a solution for that some time (not sure yet). BK's website carries the Lehner 400-540 mounting plate, which would work with the Feigao 380 motors. EDIT: Just saw your other post. The 6s will not run well when undergeared. It won't pull enough amps to "wake up". But at the "wake up" point, it is going to pull a lot of amps, and run time will be rather short (compared to other motors, anyways). The 6s won't accelerate like the SS5800 because the SS5800 actually uses a 400 size rotor, which can get spinning to full RPM faster because of less weight in the rotor. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz Last edited by MetalMan; 09.15.2005 at 07:23 PM.