RC-Monster Forums - View Single Post - bead-loc rim and tire combo

mt_enthusiast · 12:04 AM

well, I had a credit elsewhere that I burned up for two sets of tires and the commando rims. Sorry Mike. Mike, can you get me another set (two pair silver rings) of the rims? I was going to switch between the different tires depending on what I was doing, but my goodness, over 100 screws to change tires..................I am not a patient person, and I'll buy another set rather than switch tires on the same rims. :rolleyes: I also need turnbuckle rod ends.

CHC, I like the idea of drilling the holes deeper. After removing the two screws that are installed to hold the rings for packaging showed the holes had stripped a little bit. No problems with cracking or the like under torque?

Do the Dace adapters work with 8mm UE axles?

	(#8)
mt_enthusiast RC-Monster Carbon Fiber Offline Posts: 107 Join Date: Aug 2005 Location: Wisconsin	09.15.2005, 11:56 PM well, I had a credit elsewhere that I burned up for two sets of tires and the commando rims. Sorry Mike. Mike, can you get me another set (two pair silver rings) of the rims? I was going to switch between the different tires depending on what I was doing, but my goodness, over 100 screws to change tires..................I am not a patient person, and I'll buy another set rather than switch tires on the same rims. :rolleyes: I also need turnbuckle rod ends. CHC, I like the idea of drilling the holes deeper. After removing the two screws that are installed to hold the rings for packaging showed the holes had stripped a little bit. No problems with cracking or the like under torque? Do the Dace adapters work with 8mm UE axles? http://www.computeagainstcancer.org/ http://www.milwaukeemuskiesinc.com Last edited by mt_enthusiast; 09.16.2005 at 12:04 AM.