RC-Monster Forums - View Single Post - So how will you be using your mamba monster?

SpEEdyBL · 05.07.2008, 07:12 PM

Anyone going to try the Novak HV motors on the MMM? If they don't cog, they will be far superior to the feigao motors imo. Judging by the temps, I get about 1/4 the heat with the HV 4.5 than I did with an 8xl, and you only need to use 1/2 the pinion size with the novak to match the top speed of the 8xl. I use 9-12 tooth pinions with mine.

	(#1)
SpEEdyBL "Out of spec" enthusiast Offline Posts: 820 Join Date: May 2005	05.07.2008, 07:12 PM Anyone going to try the Novak HV motors on the MMM? If they don't cog, they will be far superior to the feigao motors imo. Judging by the temps, I get about 1/4 the heat with the HV 4.5 than I did with an 8xl, and you only need to use 1/2 the pinion size with the novak to match the top speed of the 8xl. I use 9-12 tooth pinions with mine. Check out my custom converted 8ight: Sub 7lb, lowest CG of any 1/8 buggy http://www.rc-monster.com/forum/show...894#post367894 Area 52 Ranch Raceway T.R.C.R.