RC-Monster Forums - View Single Post

glassdoctor · 05.10.2008, 02:34 AM

To compare, I weighed a Mamba Max with 30mm fan and UBEC, all wires etc and it was about 3.9oz.

If I used 12ga wire on the Monster, it might drop it to about the same?

Future production runs of the Monster will have the bullets, so that would be an option.

I don't really see the need for more than 12ga wire unless a setup is pulling a constant 100+ amps... which is very rare. But, Castle thinks the 10ga is a good thing. :)

	(#7)
glassdoctor TEAM FUSION Offline Posts: 2,041 Join Date: Jul 2006 Location: Iowa... Hawkeye country	05.10.2008, 02:34 AM To compare, I weighed a Mamba Max with 30mm fan and UBEC, all wires etc and it was about 3.9oz. If I used 12ga wire on the Monster, it might drop it to about the same? Future production runs of the Monster will have the bullets, so that would be an option. I don't really see the need for more than 12ga wire unless a setup is pulling a constant 100+ amps... which is very rare. But, Castle thinks the 10ga is a good thing. :) Jammin CRT MM/Neu 1515 1700kv Losi 8IGHT MM/Neu 1512 1900kv Kyosho 777 T4 MM 5700 B4 LRP XX4 MM 7700 old losi xxcr, MM4600 4s lipo 70mph+