RC-Monster Forums - View Single Post

BrianG · 05.10.2008, 05:19 PM

Are you using the stock AM radio? AM is quite sensitive to noise and these BL systems can cause quite a bit of it. At the least, an FM radio (or better a 2.4Ghz setup) is recommended.

Try moving the antenna as far away from the motor and power wires as possible and see if that helps. If so, the radio is probably at fault.

	(#3)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	05.10.2008, 05:19 PM Are you using the stock AM radio? AM is quite sensitive to noise and these BL systems can cause quite a bit of it. At the least, an FM radio (or better a 2.4Ghz setup) is recommended. Try moving the antenna as far away from the motor and power wires as possible and see if that helps. If so, the radio is probably at fault.