RC-Monster Forums - View Single Post

Takedown · **Will My setup Work Properly? -** 05.14.2008, 07:22 PM

Finally have made my list on what I plan to get and run in my Cen Matrix truggy. I will be running a Mamba Max ESC with the updated firmware, Medusa 36-60 1600kv or 2000kv motor, FlightPower 3200mah 30c 5s lipo "Might Be getting a 4500mah 6s soon". I am wondering how well this setup will run? Will their be any heat issues or noticable cogging if programmed properly? I want to be able to start from a standstill and run about 3 or so mph and not notice any cogging and not to have any heat issues at all. Is this possible and what settings would you reccomend?

	(#1)
Takedown WARNING: May become violent. Offline Posts: 2,426 Join Date: Mar 2007 Location: Wisconsin	Will My setup Work Properly? - 05.14.2008, 07:22 PM Finally have made my list on what I plan to get and run in my Cen Matrix truggy. I will be running a Mamba Max ESC with the updated firmware, Medusa 36-60 1600kv or 2000kv motor, FlightPower 3200mah 30c 5s lipo "Might Be getting a 4500mah 6s soon". I am wondering how well this setup will run? Will their be any heat issues or noticable cogging if programmed properly? I want to be able to start from a standstill and run about 3 or so mph and not notice any cogging and not to have any heat issues at all. Is this possible and what settings would you reccomend? RIP- Tammy (9/14/08) Lamborghini's= True Engineering Marvel's