RC-Monster Forums - View Single Post - Brushless E-Revo Help?

Mike_D · 09:03 PM

I use a 40tooth spur and 16 tooth pinion in my Revo and a Feigao 8XL on 4s lipo's and after about 20-25 minutes my motor is about 170 degrees. It's a little on the hot side but seems to be holding up so far.

	(#11)
Mike_D RC-Monster Carbon Fiber Offline Posts: 377 Join Date: Jun 2005 Location: Minnesota	05.14.2008, 09:01 PM I use a 40tooth spur and 16 tooth pinion in my Revo and a Feigao 8XL on 4s lipo's and after about 20-25 minutes my motor is about 170 degrees. It's a little on the hot side but seems to be holding up so far. HB Ve8 x 2 Last edited by Mike_D; 05.14.2008 at 09:03 PM.