[starscream]

Thanks coolhandcountry,
I am still working on upgrading my center diff. It is comming along quite well and I plan to have it finished in a week or so. I most likely won't impliment the diff until I get the gorilla revo conversion though. (hopefully mike will get these soon :) )
I got the mugen diff from ebay. You can get a f/r diff or a center diff (either will work). A diff from an xray will work as well but I couldn't find one for the right price. The mugen diff uses 5mm shafts and the xray uses 6mm shafts. the 5mm shafts work fine for me.

I'm not really familiar with the emaxx tranny so I took a peak at the traxxas exploded views. It looks like the e-tranny has a 31t and a 36t output gear. The diameter of the mugen diff is the same diameter as the revo 28t output gear so the diff should easily fit in the e-maxx tranny. However, unless you get real creative, you'll probably want to convert the tranny to a single speed.

I am going to be using the center diff plate of the ofna pirate 10. I will need to trim the plate diameter down a bit but it seems that this plate is exactly what I needed to finish the job.

I'll post more pics when this is complete.