Quote:
Originally Posted by BrianG
In a previous thread, you mentioned the use of an LVC PCB. What are you using for that?
|
I robbed one out of a 3S PDA Battery Pack that used Prismatic cells.
Cylindrical cells can handle a lower lvc.
I was looking at purchasing one at this website before I discovered the "freeby" I could just rob from the Pack I had.
http://www.batteryspace.com/index.as...S&Category=711
They have a wide variety of lvc modules. From 1S all the way up to 10S. Most of these really aren't practical for brushless applications since they don't support the kind of amp draw that brushless demands.
Very useful for applications such as the Lantern, since it's current draw is relatively low.
