RC-Monster Forums - View Single Post - MMM vs MM with A123's.. Check this out boys :D

MetalMan · 05.27.2008, 02:18 AM

5s1p A123 is quite weak - 1000amps peak. Running 5s2p in my "slipperential" Revo (the one which lincpimp now owns) I would get 10-15mins with a 7XL and MM geared for ~45mph top. Since it was a custom conversion with the motor only slightly offset to the left side, I could easily run 2s2p next to the motor and 3s2p on the right side to achieve decent weight balance and CG.

	(#5)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	05.27.2008, 02:18 AM 5s1p A123 is quite weak - 1000amps peak. Running 5s2p in my "slipperential" Revo (the one which lincpimp now owns) I would get 10-15mins with a 7XL and MM geared for ~45mph top. Since it was a custom conversion with the motor only slightly offset to the left side, I could easily run 2s2p next to the motor and 3s2p on the right side to achieve decent weight balance and CG. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz