Quote:
Originally Posted by speed demon
Let's say for instance on my rustler with the medusa motor running 4S then putting in a 5S but gear it down too the same speed will I have the same run time given both bats are the same mah?
|
It's unlikely that scenario will happen. You'd have to make sure that the gear reduction itself reduces the current draw by roughly 20% with the 5S setup. I'm not sure that gearing for the same speed with both batts would do that. I think the only way you would really know how close you can match the current draw of the setups is to run them on an Eagletree or similar datalogger.