RC-Monster Forums - View Single Post - Strange glitchiness with sidewinder and MM with ccbec

Sammus · 06.04.2008, 10:56 AM

I had considered that, but according to the specs on the a123 website, I should be able to pulse up to 140A, and have a constant 70A before the voltage drops below 2vpc, which would still be 6V (plenty for the reciever...)

My old fried lipo packs rated to 100A pulse when they were new and I never saw the problem either...

As an update I am starting to think it is interference. I had a quick read of the faq on CC's website, and after twisting the batteries wires and braiding the motor wires, I've been unable to replicate the glitching (didn't move anything on the chassis!). Hopefully it will stay like that :)

	(#3)
Sammus RC-Monster Titanium Offline Posts: 1,161 Join Date: Jan 2008 Location: All over Australia.	06.04.2008, 10:56 AM I had considered that, but according to the specs on the a123 website, I should be able to pulse up to 140A, and have a constant 70A before the voltage drops below 2vpc, which would still be 6V (plenty for the reciever...) My old fried lipo packs rated to 100A pulse when they were new and I never saw the problem either... As an update I am starting to think it is interference. I had a quick read of the faq on CC's website, and after twisting the batteries wires and braiding the motor wires, I've been unable to replicate the glitching (didn't move anything on the chassis!). Hopefully it will stay like that :)