|
06.09.2008, 08:58 PM
Well, the MMM has been run beyond the 1 hr mark with minor mod to the fan. Removed the lead from the esc & plugged it into the receiver. Also using a UBEC to power everything. So far, so good. The fan is mounted in the front of the buggy above the steering servo with 1 hole offset to the rear of the esc. I.e. no hole in the shell directly above the esc. With this configuration, after an hr of running hard around the track, esc was 10 deg C above ambient with fan. More tests this weekend...
Regards,
Joe Ling
Hyper 9e Medusa 4S, Savage 5S MMM 8XL, Jammin' 4S Neu MMM, X2 Ninja JX, X2 MMM 5S Neu, E REVO Medusa 6S
|