RC-Monster Forums - View Single Post - New E-Revo was at my LHS today.

VintageMA · 06.14.2008, 12:23 AM

I'll probably run it stock for a bit until I can get all the parts together, but I am planning on running the Tekno Nue 1515 - either the 2.5D (1650kv) or the 3D (1360kv) - not quite sure which yet.

I also need to figure out all the gearing ratios (diffs, tranny, pinion/spur). All I have is hardened Mod1 pinions, so I have to see what my options are for 32p.

Going to run it with MMM that so far has been okay (about 2 hours on 5S and 6S with no issues).

I would really like to see Traxxas release the single motor mount adapter before updating - but probably won't be able to resist.

More to come tomorrow night (w/ pics) once I get it out of the box and can do some measurement for battery. Also - the way the rear shocks are mounted it looks like a 1515 might be the biggest motor that can fit in there - not sure if a 1521 will make it.

	(#8)
VintageMA RC-Monster Aluminum Offline Posts: 660 Join Date: Sep 2006 Location: CT	06.14.2008, 12:23 AM I'll probably run it stock for a bit until I can get all the parts together, but I am planning on running the Tekno Nue 1515 - either the 2.5D (1650kv) or the 3D (1360kv) - not quite sure which yet. I also need to figure out all the gearing ratios (diffs, tranny, pinion/spur). All I have is hardened Mod1 pinions, so I have to see what my options are for 32p. Going to run it with MMM that so far has been okay (about 2 hours on 5S and 6S with no issues). I would really like to see Traxxas release the single motor mount adapter before updating - but probably won't be able to resist. More to come tomorrow night (w/ pics) once I get it out of the box and can do some measurement for battery. Also - the way the rear shocks are mounted it looks like a 1515 might be the biggest motor that can fit in there - not sure if a 1521 will make it. “Everyone has a right to be stupid; some people just abuse the privilege.”