RC-Monster Forums - View Single Post - i have to replace bulkheads, anything i should check/lube?

jayjay283 · 08:46 PM

You can take the 4 screws off the corners and open the outer casing, dab some grease around the ring gear it will make 'em a bit quieter, but I wouldnt open the inner diff carrier case unless you want to put in new diff oil, if so you may need to buy a new seal kit or they might leak. link Id just leave 'em alone unless you want thicker oil for your new brushless setup. If they break they are $16 on ebay. Im running 75k front 50k rear oil

edit :stock is 30k i believe

	(#4)
jayjay283 RC-Monster Titanium Offline Posts: 1,777 Join Date: Feb 2008 Location: Illinois	06.18.2008, 08:44 PM You can take the 4 screws off the corners and open the outer casing, dab some grease around the ring gear it will make 'em a bit quieter, but I wouldnt open the inner diff carrier case unless you want to put in new diff oil, if so you may need to buy a new seal kit or they might leak. link Id just leave 'em alone unless you want thicker oil for your new brushless setup. If they break they are $16 on ebay. Im running 75k front 50k rear oil edit :stock is 30k i believe Last edited by jayjay283; 06.18.2008 at 08:46 PM.