RC-Monster Forums - View Single Post

GriffinRU · 05:03 PM

Male plugs - that is what Mike had, I prefer direct solder or females. But anything can be done upon request, even bare wires.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
<o:p></o:p>
Ratings would come up later after testing’s, but 100A would be no problem, i.e. with new heatsinking dumping 6W won't be a big deal. Maybe even higher currents possible...<o:p></o:p>
<o:p></o:p>
I do not like these long copper posts, heatsinking is not that efficient but shorting possibility quite high. I would rather solder wires directly to pcb...<o:p></o:p>

I want to make capacitor leads very short and solder UBEC leads to W.S.Dean connector instead of ESC posts, this way it would be much cleaner setup. But still good as alfa-unit :)

	(#6)
GriffinRU RC-Monster Aluminum Offline Posts: 748 Join Date: Oct 2005	06.29.2008, 04:40 PM Male plugs - that is what Mike had, I prefer direct solder or females. But anything can be done upon request, even bare wires.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> <o:p></o:p> Ratings would come up later after testing’s, but 100A would be no problem, i.e. with new heatsinking dumping 6W won't be a big deal. Maybe even higher currents possible...<o:p></o:p> <o:p></o:p> I do not like these long copper posts, heatsinking is not that efficient but shorting possibility quite high. I would rather solder wires directly to pcb...<o:p></o:p> I want to make capacitor leads very short and solder UBEC leads to W.S.Dean connector instead of ESC posts, this way it would be much cleaner setup. But still good as alfa-unit :) Last edited by GriffinRU; 06.29.2008 at 05:03 PM.