RC-Monster Forums - View Single Post

traxxasrevony · 11:29 PM

i decieded to change my plans a little bit and remove the tranny all toegther and use a axi 4130/16 outrunner with a custom mount.
im kinda stuck on how to connect the motor shaft to the diff i was thinking using this kit http://www.rc-monster.com/proddetail..._G-MAXX&cat=11 and boring out one of the drive cups to fit the 6 mill shaft think this would work. if not please throw up some ideas.

	(#17)
traxxasrevony RC-Monster Carbon Fiber Offline Posts: 148 Join Date: Jun 2008	06.29.2008, 11:10 PM i decieded to change my plans a little bit and remove the tranny all toegther and use a axi 4130/16 outrunner with a custom mount. im kinda stuck on how to connect the motor shaft to the diff i was thinking using this kit http://www.rc-monster.com/proddetail..._G-MAXX&cat=11 and boring out one of the drive cups to fit the 6 mill shaft think this would work. if not please throw up some ideas. Last edited by traxxasrevony; 06.29.2008 at 11:29 PM.