RC-Monster Forums - View Single Post

DRIFT_BUGGY · 12:07 AM

Well changed to 15T pinion and timing to 0 and went down to the track and after 8 minutes again same temps as above. I thought it was running better as I perfered the 15T over the 14T but after brining it in to check the temp. I don't think I mentioned in the 1st post that I have a front cover in front of the motor to stop debris getting in the holes.

	(#30)
DRIFT_BUGGY RC-Monster Brushless Offline Posts: 2,077 Join Date: May 2007 Location: Australia	06.30.2008, 12:05 AM Well changed to 15T pinion and timing to 0 and went down to the track and after 8 minutes again same temps as above. I thought it was running better as I perfered the 15T over the 14T but after brining it in to check the temp. I don't think I mentioned in the 1st post that I have a front cover in front of the motor to stop debris getting in the holes. Losi 8ight MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F Last edited by DRIFT_BUGGY; 06.30.2008 at 12:07 AM.