RC-Monster Forums - View Single Post

DRIFT_BUGGY · 06.30.2008, 06:23 PM

Well I tried to grind down the Motech Skid Plates down on the very front so I could put them on. Didn't end up working so I have the front skid plate just held up on the 2 rear screws. See how that goes. Got no problem with the rear one, only the 2 screws up the very front with the bumper. 8-32 x 1/2" is the longest screws I could find with a flat head and that is what the chassis already has.

	(#65)
DRIFT_BUGGY RC-Monster Brushless Offline Posts: 2,077 Join Date: May 2007 Location: Australia	06.30.2008, 06:23 PM Well I tried to grind down the Motech Skid Plates down on the very front so I could put them on. Didn't end up working so I have the front skid plate just held up on the 2 rear screws. See how that goes. Got no problem with the rear one, only the 2 screws up the very front with the bumper. 8-32 x 1/2" is the longest screws I could find with a flat head and that is what the chassis already has. Losi 8ight MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F