RC-Monster Forums - View Single Post - what do you all use to seal upt he front of the Neu motors

MTBikerTim · 07.01.2008, 12:27 AM

I use electrical tape to cover my bearings and holes in brushed and brushless motors. I drive a lot on this gravel which seems to have a lot of iron in it. If you drop a magnetic screw driver into it all the small rocks will stick to it. It's the sort of stuff that will destroy an open motor quickly. Hence if I get a Neu it will be sealed.

	(#11)
MTBikerTim Yip Yip Yip... Offline Posts: 1,489 Join Date: Aug 2007 Location: Australia	07.01.2008, 12:27 AM I use electrical tape to cover my bearings and holes in brushed and brushless motors. I drive a lot on this gravel which seems to have a lot of iron in it. If you drop a magnetic screw driver into it all the small rocks will stick to it. It's the sort of stuff that will destroy an open motor quickly. Hence if I get a Neu it will be sealed. Savage: FLM Conversion, 6s, MMM, CC 1520. Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S.