RC-Monster Forums - View Single Post

Takedown · 08:22 PM

Ok you guys good news! I was talking to one of my friends online and he reccomended me to a guy who custom winds brushless 6-pole motors. The weird thing is he has the 600xl instock and rewound to Delta 5 turn meaning 1680kv "same as stock kv" but instead he has 200 celcius windings in it and says their very comparable to the stuff they use for Neu windings. He says the before and after preformance results are pretty dramatic. The temps dropped quite a bit and preformance went up some. I asked him if he'd be interested in trading for a MM with an (8) cap board and he said yes. He is sending first so pics will be coming here very soon.

	(#5)
Takedown WARNING: May become violent. Offline Posts: 2,426 Join Date: Mar 2007 Location: Wisconsin	07.03.2008, 08:12 PM Ok you guys good news! I was talking to one of my friends online and he reccomended me to a guy who custom winds brushless 6-pole motors. The weird thing is he has the 600xl instock and rewound to Delta 5 turn meaning 1680kv "same as stock kv" but instead he has 200 celcius windings in it and says their very comparable to the stuff they use for Neu windings. He says the before and after preformance results are pretty dramatic. The temps dropped quite a bit and preformance went up some. I asked him if he'd be interested in trading for a MM with an (8) cap board and he said yes. He is sending first so pics will be coming here very soon. RIP- Tammy (9/14/08) Lamborghini's= True Engineering Marvel's Last edited by Takedown; 07.03.2008 at 08:22 PM.