RC-Monster Forums - View Single Post

Finnster · 07.09.2008, 11:11 PM

I don't feel like starting a whole another Hyper ST thread, so I'll just throw a couple pics of mine up here. Currently it has my old 8XL and my MM from my CRT.5 currently powered by 4S 5Ah TrueRCs. Plan is to change over to a MMM and a Neu 1515 2.5D and adding a cell to the batt for 5S. I can ditch the BEC and the extra wires for the fan and the bec power supply then as well and clean up more. I have it geared 12/46. On the mashers tonite I was pulling 45-46 mph on radar. A bit too fast for the track. Here's to the MMM coming out soon.

BTW.. I don't know why the paint looks sparkly. Its insanely humid out, must be water droplets. I also already managed to lose a wheel nut and had to use a spare

Lots of loctite on that one. :)

	(#108)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	07.09.2008, 11:11 PM I don't feel like starting a whole another Hyper ST thread, so I'll just throw a couple pics of mine up here. Currently it has my old 8XL and my MM from my CRT.5 currently powered by 4S 5Ah TrueRCs. Plan is to change over to a MMM and a Neu 1515 2.5D and adding a cell to the batt for 5S. I can ditch the BEC and the extra wires for the fan and the bec power supply then as well and clean up more. I have it geared 12/46. On the mashers tonite I was pulling 45-46 mph on radar. A bit too fast for the track. Here's to the MMM coming out soon. BTW.. I don't know why the paint looks sparkly. Its insanely humid out, must be water droplets. I also already managed to lose a wheel nut and had to use a spare Lots of loctite on that one. :)