RC-Monster Forums - View Single Post

MetalMan · 07.10.2008, 10:30 PM

Surprisingly I had an issue with my Neu 1512 2.5D/F and MMM. At one point on the track it was cogging VERY badly at startup. Normally I would just go over to it and check out what was wrong, but the cogging was intermittent. When I finally took temps, my Neu was at 220 deg. F and the MMM was at 190! Normally that same setup would've been 160 for the Neu and ~140 on the MMM. I let everything cool down, and all was fine... I have no idea.

	(#11)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	07.10.2008, 10:30 PM Surprisingly I had an issue with my Neu 1512 2.5D/F and MMM. At one point on the track it was cogging VERY badly at startup. Normally I would just go over to it and check out what was wrong, but the cogging was intermittent. When I finally took temps, my Neu was at 220 deg. F and the MMM was at 190! Normally that same setup would've been 160 for the Neu and ~140 on the MMM. I let everything cool down, and all was fine... I have no idea. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz