RC-Monster Forums - View Single Post - robitronic br-50 trophy truck

othello · 07.19.2008, 05:32 AM

The trophy truck is based on the Robitronic Mantis truggy chassis (Wheelbase: 362-368mm / 14.25-14.49in) and uses arms and tires of the Robitronic buggy. It uses longer wheel hubs compared to the buggy to widen its track width. The body won't fit a 1:8 buggy. Its offroad capabilities can be compared to a 1:8 buggy due to the "small" buggy tires. If you intend to run it on a track it should feel fine.

	(#4)
othello HV basher Offline Posts: 392 Join Date: Jun 2007 Location: Austria (Europe)	07.19.2008, 05:32 AM The trophy truck is based on the Robitronic Mantis truggy chassis (Wheelbase: 362-368mm / 14.25-14.49in) and uses arms and tires of the Robitronic buggy. It uses longer wheel hubs compared to the buggy to widen its track width. The body won't fit a 1:8 buggy. Its offroad capabilities can be compared to a 1:8 buggy due to the "small" buggy tires. If you intend to run it on a track it should feel fine. Brushless 1:5 custom 4wd Baja based on 1:8 truggy chassie Jazz 55-10-32, Neu 1515/2Y (1100kv), 9s2p A123 (27v), up to 3.1KW Latest video with eagletree Data inserts: Run on asphalt