RC-Monster Forums - View Single Post - Auto-shifting 2 Speed AND motor brake/reverse?

George16 · 07.20.2008, 03:37 AM

I don't know if you consider that bullet proof but the pin that holds the OWB in place is only 2mm in diameter. I had broken that before on my nitro so I ended up drilling the shaft to 2.5mm so I can use a 2.5mm hardened rod.

	(#6)
George16 Supermaxx Offline Posts: 2,031 Join Date: Oct 2007 Location: Earth	07.20.2008, 03:37 AM I don't know if you consider that bullet proof but the pin that holds the OWB in place is only 2mm in diameter. I had broken that before on my nitro so I ended up drilling the shaft to 2.5mm so I can use a 2.5mm hardened rod. Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer) Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2)