View Single Post
Old
  (#28)
Sammus
RC-Monster Titanium
 
Sammus's Avatar
 
Offline
Posts: 1,161
Join Date: Jan 2008
Location: All over Australia.
07.24.2008, 08:40 AM

OK, so what do you think of this:

When I had the same problem with the Rustler, I took off the BEC and it all worked fine. I tried doing it with the Mamba Max (replacing the red wire in the esc lead) and the mamba max's internal BEC is working, the receiver powers up etc, I can use steering so it is getting signal, but no throttle! No beeps, just all the lights come on. I can't attempt to reprogram the Radio or anything, the esc just doesnt detect any signal.

Just to make sure I didn't wreck something somehow when I removed the BEC, I soldered it back one, removed the red wire from the esc lead, and everything is working again! Mamba max is detecting throttle input as usual.

Its been a year since the initial purchase, but it was only just replaced cuz I broke it before (paid $50 - that one was my fault). Here's hoping this new one is covered. to send it insured back to the states plus the repair fee is close to $80 USD, I can get a brand newwy for $100 delivered from bishop.
   
Reply With Quote