|
08.09.2008, 07:27 PM
so how far are the screws allowed to go into the motor???
like ive got them 4.7mm into the motor, should i use shorter screws? i though the maximum was 5mm
hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r
XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
|