[JerryF504]

I have a v1 that I used a bec on to take as much load as possible off of the internal bec. I even ran the wires for the internal fan to the external bec. It worked for 2 months with no problems except the fan stopping. I replace it with a Novak 25mm, but now I a v2 so it's collecting dust. I have 14 hours or more on my v2 using the internal bec with no problems. I run it on 5s and 6s in a 3905 E-Maxx with 2 MG995 200oz steering servos so I'm sure there is PLENTY of load on the bec. I think it's safe to say you will not need your CCBEC for your E-Revo. Maybe you should start another project that will use a MM on 4s. lol