RC-Monster Forums - View Single Post - I did a small test today w/a mmm and MGM esc

tc3_racer_001 · 07:30 PM

i think the reason why, is becuase the mmm CAN draw heaps of current to start off... the ability to do this makes it so smooth (i think, never actaully run one yet...) it then passes this huge current to the motor making everything that little bit hotter. also, would the drag brake cause lots of heat? it would be great if you could change 1 variable each time and drive the same and see if you can get the temps to match the MGM?

	(#4)
tc3_racer_001 RC-Monster Carbon FIBRE NOT FIBER! Offline Posts: 701 Join Date: Apr 2008 Location: Brisbane, Australia	08.16.2008, 07:29 PM i think the reason why, is becuase the mmm CAN draw heaps of current to start off... the ability to do this makes it so smooth (i think, never actaully run one yet...) it then passes this huge current to the motor making everything that little bit hotter. also, would the drag brake cause lots of heat? it would be great if you could change 1 variable each time and drive the same and see if you can get the temps to match the MGM? hyper 8.5 pro SOLD! Monster Max Still Working... JR SX3 Neu 1512 2D/S 12t pinion 4800 zippy-r XRAY xt8 MMM Neu 1512 3D/F 11t pinion 6s 5000 Flightmax/ 4s 4000 Turningy Last edited by tc3_racer_001; 08.16.2008 at 07:30 PM.