RC-Monster Forums - View Single Post

lincpimp · 08.18.2008, 02:18 AM

My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far.

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

	(#277)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	08.18.2008, 02:18 AM My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far. I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too. Alot of Savage parts for sale!!!