Quote:
Originally Posted by lincpimp
|
Quote:
Originally Posted by jnev
jhautz - What kind of plug does that fan come with? Does it come with one to plug right into the battery slot in the receiver?
|
http://www3.towerhobbies.com/cgi-bin...?&I=LXNPH1&P=7
This one. It comes with a JST style plug, but I just use a short servo extender cable and the plug on the extender cable flexes just enought when I push the JST into it that is works without having to bother with changing the JST plug on the fan.
Extender like this.
http://www3.towerhobbies.com/cgi-bin...&I=LXL287&P=ML
Looks like this with the jst fan plug in the extender cable plug.
This is what it looks like when I cut the top fan grill out and with the Integy fan installed. Earlier in the thread I posted a picture of the mod on the inside of the case to keep the white fan plug from being broken off the bottom of the circut board. The mod for the wire clearance is easy. Just take a hobby knife and shave a little off the case to make the wire slot a little bigger and then wrap the wires with electricle tape right where they would be touching the case.
