RC-Monster Forums - View Single Post - question about mamba esc motor compatibility

E-Revonut · 08.27.2008, 01:08 AM

I ran a Novak hv4.5 on a MM with 2S in a crt.5 till my Medusa came. Only had to run it for a couple days but had no issues. Iactually thought about keeping it in there but didn't want to cut the sensor cable and I wanted to use a bigger pinion than 11t, 5000kv is a bit much even on 2S, at least for my liking.

	(#5)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	08.27.2008, 01:08 AM I ran a Novak hv4.5 on a MM with 2S in a crt.5 till my Medusa came. Only had to run it for a couple days but had no issues. Iactually thought about keeping it in there but didn't want to cut the sensor cable and I wanted to use a bigger pinion than 11t, 5000kv is a bit much even on 2S, at least for my liking.