Quote:
Originally Posted by mk351e
Finally, why is it that I have my MMM LVC set to 18V, and yet when I plug the battery in to charge (and balance at the same time), the charger says the battery is ~20V?? What's wrong? and am I getting robbed of 2V?
|
First, 3v per cell cutoff is too low. You need to set it to at least 3.1v per cell, and 3.2v per cell is preferable. Under load the battery is hitting the lvc. When you let it rest and it is not under load the voltage will rise a bit. Most likely it is rising quite a bit due to the very heavy load on the lipo.