[E-Revonut]

I can somewhat agree. A NOVAK HV 4.5 system got me into brushless and it was pretty good. My problem came because of the roller that I had bought had all kinds of messed up gearing in it and cobbed together. I was playing with gearing and found what worked. Then I putted a G1 tranny in and didn't change the pinion accordingly. I fried the esc. Motor worked flawlessly still even on a MM. While waiting for the return of my MMM I actually thought about getting that system up and running again. It had acceptable speed and the power was more controlled than more powerful setups. What kept me away is the lack of programibility and lvc, both problems are addressed with their new systems. Only other problem I had was snapping the 3mm shaft and waiting for the release of the 5mm, which has also been addressed in the new systems. All said and done though I'm pretty happy with my Tekno Neu and MMM, but if that MMM gives me more problems I may get the replacement, sell it, sell the Neu, and then I could but the HV pro and some more lipos.....But I hope that doesn't happen!!!