RC-Monster Forums - View Single Post

SpEEdyBL · 09.07.2008, 03:48 PM

Well a 12 tooth pinion with the stock spur yields about 30:1 in an E-maxx and the tires are 6" tall. Thats probably a good starting point for all HV motors so thats how I came up with 40:1 with 8" tires.

	(#10)
SpEEdyBL "Out of spec" enthusiast Offline Posts: 820 Join Date: May 2005	09.07.2008, 03:48 PM Well a 12 tooth pinion with the stock spur yields about 30:1 in an E-maxx and the tires are 6" tall. Thats probably a good starting point for all HV motors so thats how I came up with 40:1 with 8" tires. Check out my custom converted 8ight: Sub 7lb, lowest CG of any 1/8 buggy http://www.rc-monster.com/forum/show...894#post367894 Area 52 Ranch Raceway T.R.C.R.