RC-Monster Forums - View Single Post

MTBikerTim · 10:29 PM

Thanks for the info too jhautz, that's exactly what I wanted to know.

What would be the best is if castle came out with a plastic case for there 6.5mm bullets. Overkill for basically everything but it would be handy.

The trx plugs don't look bad and seem to have some advantages over the deans. The ec5s though really look like they could carry a lot more current (could be a bad thing) then the deans and trx plugs so I'll give them a try. I'm sure I won't notice a difference just piece of mind and a little easier on the fingers while soldering.

	(#8)
MTBikerTim Yip Yip Yip... Offline Posts: 1,489 Join Date: Aug 2007 Location: Australia	09.09.2008, 10:25 PM Thanks for the info too jhautz, that's exactly what I wanted to know. What would be the best is if castle came out with a plastic case for there 6.5mm bullets. Overkill for basically everything but it would be handy. The trx plugs don't look bad and seem to have some advantages over the deans. The ec5s though really look like they could carry a lot more current (could be a bad thing) then the deans and trx plugs so I'll give them a try. I'm sure I won't notice a difference just piece of mind and a little easier on the fingers while soldering. Savage: FLM Conversion, 6s, MMM, CC 1520. Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S. Last edited by MTBikerTim; 09.09.2008 at 10:29 PM.