Quote:
Originally Posted by DRIFT_BUGGY
I used a dremel won't take long. Put some tape over the holes on the motor to stop shavings from going inside the motor
|
I do the same thing as well as use blue lock tight....no problems since
1. MBX-6 T8 1900KV, RX8 ON 4S
2. MBX-5T 1520, MMM ON 5S
3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S
4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S
5. TEN T 2650 T8, MMP ON 3S