RC-Monster Forums - View Single Post

MTBikerTim · 01:59 AM

That was my issue with the deans too.

Just after posting that last comment my EC5 connectors showed up and so did my Monster max

(MMM was sent about 2 weeks ago).

Now I just need my bec and soldering iron to turn up but I can do without. I have a CC Bec and 3 other soldering irons I can use.

My CC Bec currently has a deans plug soldered to the end of it. I am thinking that it might be a good idea to keep it on there. I might split 2 wires off the MMM battery leads and solder a deans plug to them so switching out the bec will be easier.

Edit: I just noticed that the bottom of one of the packs of connectors wasn't sealed properly so all the bullets are missing. Darn losi's shoddy packaging materials.

	(#6)
MTBikerTim Yip Yip Yip... Offline Posts: 1,489 Join Date: Aug 2007 Location: Australia	09.17.2008, 09:58 PM That was my issue with the deans too. Just after posting that last comment my EC5 connectors showed up and so did my Monster max (MMM was sent about 2 weeks ago). Now I just need my bec and soldering iron to turn up but I can do without. I have a CC Bec and 3 other soldering irons I can use. My CC Bec currently has a deans plug soldered to the end of it. I am thinking that it might be a good idea to keep it on there. I might split 2 wires off the MMM battery leads and solder a deans plug to them so switching out the bec will be easier. Edit: I just noticed that the bottom of one of the packs of connectors wasn't sealed properly so all the bullets are missing. Darn losi's shoddy packaging materials. Savage: FLM Conversion, 6s, MMM, CC 1520. Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S. Last edited by MTBikerTim; 09.18.2008 at 01:59 AM.