RC-Monster Forums - View Single Post

bdebde · 09.18.2008, 12:51 AM

Continuous beep means EPROM error and will need to program again. Make sure endpoints are 125% according to MGM for best results. Hold full throttle, turn on controller, wait 10 sec (forever), should hear 3 beeps, hold full reverse, 1 beep, neutral, 2 beeps, turn off controller.

	(#8)
bdebde That's All Folks! Offline Posts: 2,359 Join Date: Dec 2006 Location: in a VAN down by the RIVER	09.18.2008, 12:51 AM Continuous beep means EPROM error and will need to program again. Make sure endpoints are 125% according to MGM for best results. Hold full throttle, turn on controller, wait 10 sec (forever), should hear 3 beeps, hold full reverse, 1 beep, neutral, 2 beeps, turn off controller. Ve8 - MMM, Neu 1509/2.5y, 6s D8T - MMM, Neu 1515/2.5D, 6s Muggy - MMM, CC 1520/1Y, 6s SC10 4X4