RC-Monster Forums - View Single Post - i need a indestructable rear diff, please help

blueb8llz · 09:02 PM

hey george16, thats funny how you said that, i was just looking at those nova cups on ebay. are these the ones your talking bout

http://cgi.ebay.com/DIFF-CUP-S-Maxx-Aluminum-Traxxas-2-5-3-3-Differential_W0QQitemZ330271679759QQcmdZViewItem?h ash=item330271679759&_trkparms=72%3A1205|39%3A1|66%3A2|65%3A12|240%3A13 18&_trksid=p3286.c0.m14
but it says pick the 3mm hole mounts only if i have modified gears. which i dont, im using the stock traxxas gears. will it still fit or no. if not, should i still get this with the 2mm screw holes? i think as long as i get this case, the screws shouldnt matter tooo much would it.
one last thing, should i purchase a AL casing? i think thats also just as important, cus that flexes and causes the ring and pinion gear teeth to break.
heres one i found for cheap
http://cgi.ebay.com/T-MAXX-2-5-3-3-E...QQcmdZViewItem

	(#8)
blueb8llz RC-Monster Aluminum Offline Posts: 812 Join Date: Mar 2008 Location: bay area california	09.20.2008, 08:59 PM hey george16, thats funny how you said that, i was just looking at those nova cups on ebay. are these the ones your talking bout http://cgi.ebay.com/DIFF-CUP-S-Maxx-Aluminum-Traxxas-2-5-3-3-Differential_W0QQitemZ330271679759QQcmdZViewItem?h ash=item330271679759&_trkparms=72%3A1205\|39%3A1\|66%3A2\|65%3A12\|240%3A13 18&_trksid=p3286.c0.m14 but it says pick the 3mm hole mounts only if i have modified gears. which i dont, im using the stock traxxas gears. will it still fit or no. if not, should i still get this with the 2mm screw holes? i think as long as i get this case, the screws shouldnt matter tooo much would it. one last thing, should i purchase a AL casing? i think thats also just as important, cus that flexes and causes the ring and pinion gear teeth to break. heres one i found for cheap http://cgi.ebay.com/T-MAXX-2-5-3-3-E...QQcmdZViewItem www.knoxxgear.com Last edited by blueb8llz; 09.20.2008 at 09:02 PM.