Quote:
Originally Posted by Dafni
You could replace the bullet connectors with wires. But de-soldering those bullets is a major PITA, especially when they touch the HS... been there. Drilling them off is amother option.
|
I gave up. I thought I ruined my MMM by getting it too hot trying to get the connectors to de-solder. I ended up Dremelling a sliver of the connectors off at the point that they make contact with the heatsink. I then soldered the connectors into the partial connectors. I had about 30 minutes of track time this past weekend with no trouble. I'm also using an Rx battery/regulator and about 8 other MMM mods.